Cotter Joint complete Design | Video Tutorial

The video shows the complete design of the cotter joint.

Cotter joint consists of principle parts:
1. Socket
2. Spigot
3. Cotter

Cotter joint is used to join two shafts and basically restricts the relative motion between the shafts.
In the video, all the three parts, the socket, the spigot and the cotter are designed and subsequently their assembly is done to   form the complete joint.

The basic layout according to which the joint has been formed is as shown below :

Video of cotter joint -

How to Install Pro E widlfire 5.0 in windows 7

Well,  before coming to this blog I am sure you all have seen those videos on youtube which teaches how to install pro e wildfire 5.0 on windows 7.

But the thing is, people don't have those shooters file with them. So I am uploading those shooter files and you can follow those videos(on youtube) using these shooters files.

Please like us and join us on facebook if you think it helped you.
https://www.facebook.com/LearningNx?ref=hl

Click Here to Download shooters

Installing NX-7.5 or lower in Windows 7 (64 bit)

Hi Guys,

NX-7.5 is basically designed to be installed in Windows XP or Windows 7 (32 bit). It can be installed in Win 7 64 bit too by modifying some of its license thing, but still this way doesn't work for some users (like me).

I figured out two ways:-

First is shown in the following video.

 

 

 

I would recommend to use this crack (even if you have one already available in your setup)

 

 

Click Here to Download

 IF YOU FACE ANY DIFFICULTY PLEASE FEEL FREE TO CONTACT US ON OUR FACEBOOK PAGE. SEE THE BOX ON YOUR RIGHT.

 

PLEASE  LIKE  THE  FACEBOOK PAGE ON THE BOTTOM RIGHT AS A "THANKS"  IF  IT  REALLY  HELPED  YOU.

IF YOU STILL FACE PROBLEMS , MESSAGE US ON OUR FACEBOOK PAGE "LEARNING NX"

Second way to install it in Win 7 64 bit is :-

Since NX 7.5 runs easily on windows XP , so the best way is to turn your computer to XP mode.

You don't need to install Windows XP separately. You just have to install XP mode from Microsoft , with which you can easily convert your computer to XP mode within a fraction of seconds and back to Win 7.

This utility is given by microsoft for the applications which doesn't support Win 7 but Win XP. So you don't need to install XP separately, just install XP mode and hop to XP mode. This process/application they called it Virtual PC.

For installing follow the step wise procedure given in the following link.

You can install Virtual PC from http://www.microsoft.com/windows/virtual-pc/

How to Install NX 7.5 on Windows

Click Here to know "How to Install NX 7.5 in Windows"